Is It Bad To Jump Start A Car Multiple Times?

Disclosure: This page contains affiliate links, As an Amazon Associate, I earn from qualifying purchases (at no extra cost to you). Learn More

The need to jump-start a car arises when you need to change the car tire or when you need to do a few repairs underneath the vehicle.

However, it is important to jump-start the car at the appropriate position, so that the car’s structural appearance would not be affected. Thus, is it advisable to always jump-start your car whenever an issue arises? Is it bad to jump-start a car multiple times?

Yes, it is bad to jump-start a car multiple times. Every time you jump-start your car, you are risking the car components to damage aside from the drained battery. This is why it is advisable to jump-start your vehicle at the manufacturer’s suggested part.

Even though you jump-start your car at the indicated part multiple times, the area would get weakened. However, if you have to jump-start your car four to five times a week, then it is time to get a new car battery.

In addition, if you keep jump-starting multiple times, you could damage the engine alternator and other bindings in the car’s engine.

It might not look like you need a new battery, but buying a new battery would stop you from jump-starting your car multiple times in a week. If you stop jump-starting your car, your car components would not be put at risk of any damage.

Table Of Contents

Can jump-start a car cause damage?

Yes, jump-starting a car can cause damage if you don’t do it correctly. Contemporary cars are manufactured with a lot more electrical components than the older models.

So, jump-starting your car incorrectly can damage those components. Putting the cable on the wrong end can reduce the electrical structure or even harm the components beyond remedy. By doing this, you would have to purchase these spoiled parts with a huge amount of money.

However, it is advisable to look through the car user handbook to know the right spot to jump-start your car. Plus, you have to ensure you don’t have to jump-start your car multiple times.

If you notice a component keeps allowing you to jump-start your car multiple times in a week, ensure you purchase a newer version of that component. You could also take your car to a professional technician to look into the issue or you can call your car model’s customer service for more help. By doing any of these, your car would be free from any damage.

In addition, the area you choose to jump-start your car also matters. You have to ensure you jump-start your car on a leveled ground and ensure everywhere is warm when you are jump-starting your car. If you jump-start your car in the rain, it could cause harmful effects.

Water is known to be a good conductor of electricity which is because of the presence of salt in the water. Although if the water is very pure, it is an excellent insulator that won’t be a conductor of electricity. The electricity caused by the rain might not harm you, but it could cause potential harm to your vehicle.

Can a vehicle battery be too dead to jump-start?

No, a vehicle battery can’t be too dead to be jump-started. Technically, a battery is a chemical element that uses a chemical reaction (oxidation and reduction reaction) named an electrochemical cell to operate on charge and produce volts between its terminals.

So, the battery cannot stop functioning without showing a symptom. However, once a battery fails, it is a hint that something is about to go wrong.

Your car battery cannot be too dead to jump-start, you just have to ensure you are connecting the cables correctly on the battery. However, if there is no other fault with your battery except it being drained, then you can bring your battery back to life by jump-starting it. Furthermore, ensure the battery is not old to be revived.

You can use another charged car battery to jump-start your dead car battery by connecting the cables properly. Plus, your car battery must not be lower than 12 volts. If it is higher than 12 volts then, the alternator can recharge the battery fully.

Trending Searches

Does revving the engine charge the battery?

Yes, revving the engine will charge the battery. How? This is because the quicker the crankshaft accelerates, the quicker it moves the strap that operates the alternator.

Plus, the quicker the alternator operates, the more current it creates to operate all the electrical components in the car, and restore the battery power. However, it is not advisable to use the revving process for a dead battery or a battery with weak cells. Using the alternator to restore the battery when you turn your car on is the best way.

Although most batteries include a caution sign that you should not use an alternator to charge the battery. So, it is advisable to purchase a battery charger to recharge your battery. Using your car alternator to restore the battery power would wear out the alternator faster.

For instance, if your battery is damaged and it keeps discharging. If you drive around to use your alternator to revive the battery, and the alternator wears out. Then, you would have to buy a new battery and alternator. (Read Also:What Should Alternator Voltage Be At Idle?)

In addition, I would advise examining both the battery charging component and the battery itself at a car service station. While these components are being examined at the service station, they would use a battery charger to charge the battery and give the battery back to you.

How do you carefully jump-start your car battery?

Batteries are one of the common car issues. Although you have to learn how to maintain a car during your driving lessons and jump-starting a car is not something everyone can do.

However, before you can jump-start a car battery you have to have the basic equipment and know-how to use these pieces of equipment properly. (Read Also:Will A Bad Alternator Cause Rough Idle?)

So, in this article, I would list the equipment and the procedure on how to jump-start your car battery. The pieces of equipment are as follows:

Jumper wires.
A jump compartment or another charged car.

Nb– jumper wires are always with a long thick wire with clasps on the two ends. These clasps are in different colors (red and black) to show the positive and the negative connector.

The red clasp is the positive connector and the black clasp is the negative connector. While jump compartments are mobile batteries utilized to recharge a battery. These wires link the jump compartment battery to your vehicle battery. If you intend to use another car, ensure the car is around.

After getting pieces of equipment, you can proceed with jump-starting procedures.

Step 1

Ensure the two cars are prepared

Before you start, check the charged car and ensure the battery has matching volts and enough volts. If the car is in a good position, make sure the two cars are very close for the jump battery to touch the two car batteries. After doing that, proceed by doing the following:

Put the two cars in natural mode.
Switch off the car’s ignition.
Turn on the car’s brake.
Lift your vehicle’s hood and hold them.

Step 2

Connect the jumper wires

Once everything is in place, you can proceed by connecting the jumper wires. Connect the clasps:

Link the positive clasp to the positive end on the dead car battery.
Link the other positive clamp to the positive end on the charged car battery.
Attach the negative clasp to the negative end of the charged car battery.
Fasten the negative clip to a piece of the metal part of the dead vehicle battery. Ensure it is not close to the battery. You can use the metal that holds up the hood.

Step 3

Turn on the charged car ignition

After you are done connecting the clips to the dead car battery and the fully charged battery, turn on the charged car ignition. Let it operate for a few minutes. (Read Also:Can I Use A Battery Charger As A Power Supply?)

Step 4

Examine the dead car battery

When the car has operated for a few minutes, check the jump-starting battery. If the light of the car is on, then the battery is charging.

Step 5

Turn on the dead car ignition

After some minutes, turn on the ignition of the dead car battery. If the battery of the vehicle is well charged, you can drive the car to your destination.

Step 6

Disconnect the jumper wires

Once your car is working perfectly, you can proceed by disconnecting the jumper wires in the opposite way you linked the wires.

Remove the negative wire from the metal plate.
Disconnect the negative end.
Unlink the positive end from the charged car battery.
Unfasten the positive end from the dead vehicle battery.

Nb- I would recommend that you allow the restored battery to work for about 15 minutes to juice up the battery.